Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Britton Manuals
  4. Bathroom Fixtures
  5. Cleargreen BS5
  6. Quick start manual

Britton Cleargreen BS5 Quick Start Manual

Four panel bathscreen 88cm x 145cm
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
Four panel bathscreen
88cm x 145cm - BS5
Before Installation:
Check the contents of the pack carefully before installation.
●
● The bath MUST be installed level and fully sealed to the tiles.
● Handle with care. Impacts can damage both the glass and the frame.
● Check for any hidden pipes or cables before drilling holes in the wall.
● The wall fixings supplied may not be suitable for your installation. You may need to source alternatives
depending on the construction of the wall you are fixing to.
● Follow each step in turn.
Care and Cleaning:
● Do not use solvents or abrasive material or chemicals to clean the enclosure.
● Only clean using soapy water and a soft cloth, rinse thoroughly afterwards.
LH
1 - 7
RH
E

Advertisement

loading
Need help?

Need help?

Do you have a question about the Cleargreen BS5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Britton Cleargreen BS5

Summary of Contents for Britton Cleargreen BS5

  • Page 1 Four panel bathscreen 88cm x 145cm - BS5 Before Installation: Check the contents of the pack carefully before installation. ● ● The bath MUST be installed level and fully sealed to the tiles. ● Handle with care. Impacts can damage both the glass and the frame. ●...

  • Page 2: Tools Required

    Tools required: SILICONE Ø6.0mm Ø2.8mm Parts supplied: Four panel Bathscreen 88cm x 145cm - BS5 B111 B013 B012 B016 B014 B114 B113 B112 B014 B012 B016 B013 ST3.5*10mm ST4*40mm B113 B111 B112 B114 2 - 7...
  • Page 3 B111 B016 B014 3 - 7...
  • Page 4 Firmly push the screen profile onto the wall profile, ensure the screen profile is as close to the wall as possible. Before securing the screen to the profile ensure that the gap between the screen and the bath is equal along its whole length. B012 B013 Please follow this step if the optional water barrier is desired.
  • Page 5 5 - 7...

  • Page 6: Maintenance

    Maintenance If necessary,please follow the below steps to replace the bottom sealing strip. 1. Fold the fourth glass as show below. 2. Take out existing sealing strip. 3. Remove the glue residual from the glass on both ends. 4. Insert the new sealing strip. 5.
  • Page 7 Maintenance If necessary, please follow the below steps to adjust the sealing strip if it does not stay in position properly or the operation is stiff. 5. Apply some transparent lubricating oil onto the surface of sealing strip evenly with the sponge or soft cloth.