Clas Ohlson 36-8284 Manual

Galaxy Light Star Projector
Art.no 36-8284
Please read the entire instruction manual before using the pro-
duct and then save it for future reference. We reserve the right
for any errors in text or images and any necessary changes
made to technical data. In the event of technical problems or
other queries, please contact our Customer Services.
Safety
CAUTION laser radiation. The product emits a
combination of LED and laser light. Never look
directly at the light sources. Risk of eye damage.
The product is intended for indoor use only.
Warning: Keep all packaging material away from children.
Choking hazard.
• Children must only use the product with adult supervision.
• Never expose the product to water or other liquids.
• Never try to open the housing, repair or modify the product
in any way.
• All repairs must be carried out by qualified service
technicians using original spare parts.
Care and maintenance
Clean the product by wiping it with a moist cloth. Use only mild
cleaning agents, never solvents or corrosive chemicals.
Responsible disposal
This symbol indicates that the product should not
be disposed of with general household waste. This
applies throughout the entire EU. In order to prevent
any harm to the environment or health hazards
caused by incorrect waste disposal, the product
must be handed in for recycling so that the material
can be disposed of in a responsible manner. When
recycling your product, take it to your local collection facility or
contact the place of purchase. They will ensure that the product
is disposed of in an environmentally sound manner.
UNITED KINGDOM • www.clasohlson.co.uk
Product description
2 3 4 5 6
1
1. Lens
2. Dimmer button – Press repeatedly to
change the brightness of the moon.
3. Light pattern with or without moon.
Press multiple times (1–4) for different effects.
4. On/different light effects/off.
Press multiple times (1–6) for different effects.
5. IR receiver for the remote control.
6. LED charge indicators.
7. Micro-USB port for the included charging cable.
Charging
Connect the supplied charging cable to the projector and to a
USB charger.
• Red charging indicator: charging in progress.
• Green charging indicator: the battery is fully charged.
Placement
The projector can be positioned at a choice of three angles:
Remote control
On/off.
ON/OFF
Increase or decrease the brightness of the
moon.
The starry sky, moon and galaxies change
7
FADE 1
FADE 2
automatically. Alternative 2 with mixed
colours.
The star pattern changes, the galaxies
W
change colour and the moon remains the
same.
The star pattern changes, the galaxies and
CYCLIC1 CYCLIC2
the moon remain the same. Alternative 2
with mixed colours.
Choose between a red, green or blue sky.
B
R G
Increase or decrease the speed of the
M-
M+
galaxies.
Timer – the projector automatically shuts off
2H
1H
after 1 hour. Alternative 2, after 2 hours.
Star constellation lights on/off.
LASER
LASER
Alternative 2, changes the star pattern.
light
The star pattern changes and the moon
LED
remains the same.
Moon on/off.
Specifications
Built-in battery 2000 mAh lithium-ion
Charging USB DC 5 V 1 A
3–4 hours
Charging time
Operating time 2–3 hours
Green laser / RGB LED <1 mW, 420–660 nm
Operating temperature approx. –10 to 40 °C
Size 145 × 145 × 65 mm
Remote control 1 × CR2025 battery