Light Control Switch - Subaru 2011 Forester Owner's Manual

when the battery voltage is discon-
nected and then reconnected for bat-
tery replacement or fuse replacement.

Light control switch

The light control switch only operates
when the ignition key is inserted into the
ignition switch.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the ignition key is
removed from the ignition switch.
NOTE
. Even if the key is removed from the
ignition switch, the lights can be illu-
minated by operating the light control
switch position from "OFF" to "
and/or " ".
. If the driver's door is opened while
the lights are illuminated and the key is
removed from the ignition switch, the
chirp sound informs the driver that the
lights are illuminated.
CAUTION
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the light control switch
is turned to the "OFF" position. If
the vehicle is left unattended for
Instruments and controls
a long time with the light control
switch set to a position other
than "OFF", the battery may be
discharged.
"
3-29
– CONTINUED –