Black + Decker BPT05WTB Instruction Manual page 19

SET UP & USE
OR ANOTHER METHOD TO OPERATE TURBO
• Press the Function
the function button again, the TURBO
illuminate on the LED screen indicating that TURBO is activated.
TO CANCEL TURBO
• Press the button. Then Press either the
symbol flashes on the LED screen
• Press the Function
and will no longer be illuminated on the LED screen indicating that TURBO is
deactivated.
OR ANOTHER METHOD TO CANCEL TURBO
• Press MODE or either the
is no longer illuminated on the s no longer be illuminated on the LED screen
indicating that the TURBO function is deactivated.
FOLLOW ME
Parts of the room are cooler where there is a draft. Other parts are warmer due
to direct sunlight. The FOLLOW ME Function allows the room to be cooled
according to the room temperature, wherever the remote is located.
• This function can be activated from the remote control ONLY. The remote
control serves as a thermostat allowing for the precise temperature control at
its location.
• To activate the Follow Me function, point the remote control towards the
appliance and press the FUNCTION
• Press either the
the LED screen.
• Press the Menu
on the LED screen.
• The remote will display the actual temperature at its location. The remote
control will send this signal to the air conditioner at 20 minute intervals.
• If the unit does not receive the Follow Me/Temp Sensing signal during a 25
minutes interval, the follow me function will be canceled and will need to be
reactivated.
• To cancel this function, press the
until the flashes on screen, and then press the
cancellation. The
NOTE: · The remote must be within 23 feet of the remote control receiver on the
air conditioner unit. It should not have any obstructions.
button, TURBO
button again. The TURBO
or
OR button until the FOLLOW ME
button. The FOLLOW ME
, then press either the
will stop flashing and disapperar from the screen.
symbol flashes on screen then press
symbol will stop flashing and will
or button until the TURBO
symbol will stop flashing
button until the TURBO
button.
will stop flashing and illuminate
button to confirm the
ENGLISH
symbol
symbol flashes on
or button
Page 19