RJM OVERTURE Quick Start

Press to turn pre-
boost on or off
Indicates the
current preset
number.
Red LEDs indicate
presets 1-4, green
LEDs indicate
presets 5-8
Press to
switch between the
main preset bank
(presets 1-4) and
the solo preset
bank (presets 5-8)
Selecting a Preset
•
Press the SOLO and ON/OFF
buttons at the same to switch to
the next preset in the bank.
There are 4 presets in each bank.
•
Press the SOLO button by itself
to switch between the normal
bank (presets 1-4) and the solo
bank (presets 5-8).
Overture Quick Start
™
OVERTURE QUICK START
Press both buttons
to move to the next
preset
settings to the current
Press to switch
pedal between active
and bypass
Saving a Preset
•
Make sure you start on the
preset you want to change.
•
Dial in the tone you'd like for this
preset.
•
Hold the MODE button for about
3 seconds, until the LEDs flash.
Press to move to the
next overdrive mode,
hold for 3 seconds to
save the current
preset.
3/2/2021