Advertisement
Quick Links
Excel Life
TM
MECHANICAL PUSH-BUTTON
EM970 / EM970L / EM970IM / EM970LIM / EM970BP / EM970LBP/ EM970LELV series
EM970IM
Package Contents
Push-button mechanism
Technical specifications
Nominal Input Voltage
Rating (Fluorescent/Incandescent)
Rating (LED)
Switch type
Terminals
Important Information
■ This product must be installed and used as per these instructions.
■ This product must be installed by a licensed electrician or similarly qualified person.
■ V90-rated building wire must be used when wiring this product.
■ This product has been designed with limited short circuit protection.
■ Repeated short circuits may still damage the product.
■ Severe electromagnetic interference from other products may cause malfunction of this product.
■ This product should only be cleaned with a damp cloth. Cleaning agents and solvents should not be used.
■ This product contains no serviceable parts and no attempt should be made to repair this product. If the product
is faulty it should be discarded.
■ Legrand reserves the right to modify the specifications of this product at any time.
EM970LIM
Button
Ring
■
■
■
EM970/EM970L
EM970IM/EM970LIM
10 AX
100 W
2-way
Intermediate
EM970 / EM970BP
1 x Push-button mechanism
1 x Pack of buttons and rings for colour variation
(EM970L, EM970LIM, EM970LBP, EM970LELV only)
Instruction Sheet
EM970BP/EM970LBP
250 V a.c.
10 AX
10 A
2 x 1.5 mm
or 1 x 2.5 mm
2
2
EM970L / EM970LBP / EM970LELV
EM970LELV
12/24 V d.c.
5 A
-
Momentary
Advertisement
Related Manuals for LEGRAND Excel Life EM970 Series
Summary of Contents for LEGRAND Excel Life EM970 Series
- Page 1 ■ This product contains no serviceable parts and no attempt should be made to repair this product. If the product is faulty it should be discarded. ■ Legrand reserves the right to modify the specifications of this product at any time.
- Page 2 Installation ( EM970L / EM970LIM / EM970LBP / EM970LELV) (Note: Laser marking is done on front of mechanism for guidance) 1. Pick the button with the desired coloured LED lens: Red or Blue 2. Check the wall plate orientation: Vertical or Horizontal. See fig. D. 3.
- Page 3 Wiring One way switching EM970L LOAD LED Indicator always ON Active and Neutral at Switch EM970L LOAD LED Indicator ON when Load is ON Active and Neutral at Switch EM970L LOAD LED Indicator ON when Load OFF (High impedance Load) Active and Neutral at Switch EM970L LOAD...
- Page 4 Customer Service Warranty For all Customer Service and Technical Support Legrand will honour all statutory guarantees that you as a consumer are please call Monday to Friday during business hours. entitled to rely upon under the Australian and New Zealand Consumer Laws against a manufacturer, including a guarantee that this product is of acceptable quality.