Nikon COOLPIX W100 Firmware Update page 6

The message shown at right will be
displayed while the update is in progress.
The message shown at right will be
displayed when the update is complete.
5
Confirm that the update was completed successfully.
5-1. Turn the camera off and remove the memory card.
5-2. Check the camera firmware version as described in Step 2, "Check the
5-3. If the updated version is displayed, the
If the update was not successful, contact a Nikon service representative.
6
Format the memory card in the camera.
Mac
current camera firmware version".
update was successful.
"XXXX" is the camera name and "**" the firmware version.
Updating...
Do not turn camera off
during update!
Done.
Turn camera off to
complete update.
COOLPIX XXXX Ver. **
This completes the firmware update.
6