Removing The Sim Card; Setting Up Wi-Fi Connection - Horizon Fitness MH50 Quick Start Manual

Removing the SIM Card

1. Turn the power off. Remove the battery cover and take out the battery.
2. Gently remove the SIM card from the SIM card slot

Setting up Wi-Fi connection

1. Press and hold the "power" button for 3 seconds until the welcome logo is displayed on the
LCD, and Wi-Fi is on.
2. Use your terminal to search the wireless network connection with the Wi-Fi's SSID of
"4G-MIFI-2.4G-xxxx"or"4G-MIFI-5G-xxxx" and click "Connect". If the security mechanism is
applied, you need to enter the correct PASSWORD.
The default password is the last 8 digits of IMEI.
Note: XXXX is the last 4 digits of device MAC Address.
You can also find the label for the default SSID and PASS WORD when you remove the back
cover.
You can also find the default SSID and Password in the WIFI Info page of Horizon MH50
screen once the device is powered on.
Setting up your WPS
If your terminal support WPS, you do not have to input the password manually once your WPS
has been set up.
To use WPS please follow these steps:
1. Enable WPS in the WebUI through Settings->Wireless->WLAN Settings->WPS
2. Press "Menu" button on the device to select "WPS Active"page on the LCD
3. Press "Power" button to active WPS function
Then you can enable the WPS function on your terminal to connect the hotspot.
Logging into the Device Management website
1. Make sure your device is connected to the Horizon MH50 via Wi-Fi or Micro-USB cable.
2. Open a browser on your computer or other connected device, and input
or http://device.WebUI
3. Enter your username and password, and click "Log In". The administrator has the right to
check and modify configuration permissions.
into the address bar.
http://192.168.1.1