StarTech.com ST121HDBTD Quick Start Manual

Quick start guide
Compact HDMI® over CAT5 Transmitter - 70m
ST121HDBTD
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Product overview
Front view
HDMI
input
Rear view
Micro-USB port
for power
For the latest information, technical specifications, and support for
this product, please visit www.startech.com/ST121HDBTD
Packaging contents
• 1 x HDMI transmitter
• 1 x USB cable for power
• 1 x quick start guide
System requirements
• HDMI enabled video source, such as a computer or Blu-ray™ player
• HDBase-T™ display or an HDBaseT receiver with an HDMI display
• CAT5e or CAT6 cabling with enough length to reach from your
video source to the location of your display
About this product
HDBaseT is a standardized, zero-latency video distribution
technology that's revolutionizing HDMI distribution. HDBaseT uses
an advanced method of modulation that enables you to distribute
uncompressed HDMI audio and video over standard network
cabling. This transmitter turns your HDMI signal into an HDBaseT
signal, enabling you to extend your source signal to an HDBaseT
display or receiver up to 70 m away.
Preparing your site
1. Setup your local HDMI enabled video source in your desired
location.
2. If you're connecting to an HDBase-T display, setup the display
RJ-45
appropriately in your desired location.
output
If your connecting to an HDBase-T receiver with an HDMI
display, setup the display appropriately in your desired location
and connect your HDBaseT receiver to the display, as per the
documentation included with your HDBaseT receiver.
Notes: Please ensure that the transmitter is situated near an
available USB power source. Make sure all devices are turned off
before you begin the installation.
*actual product may vary from photos
or
Manual Revision: 02/01/2016