StarTech.com ST121WHDLR Quick Start Manual

HDMI over Wireless Extender |1080p | 200 m

Product Diagram (ST121WHDLR)

Note: The above image represents both Transmitter and Receiver. The ports are
located in the same position on both the Transmitter and Receiver.
Port/Button/LED/Part
• Pairing: Used to pair devices to the Wireless
Transmitter.
Pairing/Channel
1
Button
• Channel: For better transmission, use the Channel
Button to use another channel.
2 Network LED • Solid red indicates that the network is connected.
• Solid blue indicates that the Display Device is
3
Video LED
connected.
4 • Connect an IR Blaster to transmit an IR signal.
IR OUT Port
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
1
1 2 3
7
4
5
6
Function
Transmitter
Note: Press and hold for 5 seconds.
5 USB Port
6 DC 5V Port
7 HDMI IN Port
8
IR Blaster
Pairing/Channel
1
Button
8
2 Network LED
3 Video LED
4
IR IN Port
5 USB Port
6 DC 5V Port
7
HDMI OUT Port
8
IR Receiver

Requirements

For the latest requirements, please visit www.startech.com/ST121WHDLR.
Quick-Start Guide
• Used for firmware updates.
Note: For future firmware updates refer to the
firmware section on the Product Support tab
startech.com/ST121WHDLR.
• Powers the Wireless Extender.
• Connects the Video Source Device to the
Wireless Extender.
• Used to transmit an infrared signal.
Receiver
• Pairing: Used to pair devices to the Wireless
Receiver.
Note: Press and hold for 5 seconds.
• Channel: For better transmission, use the Channel
Button to use another channel.
• Solid red indicates that the network is connected.
• Solid blue indicates that the Display Device is
connected.
• Connect an IR Receiver to receive an IR signal.
• Used for firmware updates
Note: For future firmware updates refer to the
firmware section on the Product Support tab
startech.com/ST121WHDLR.
• Powers the Wireless Extender.
• Connects the Display Device to the Wireless
Extender.
• Used to receive an infrared signal.
www.
www.