Willis WST12MC16S Service Manual page 71

Removal Procedure
7.Remove the sound blanket.
Lift and remove the
1
sound blanket (top).
Untie the strings and
2
open the sound blanket.
Lift and remove the
3
sound blanket (body) as
it is opened.
4 Pull the sound blanket
(inner) out.
8.Remove the partition plate.
1 Loosen the screw of the
four way valve coil.
Sound blanket.
Since the piping ports on
the sound blanket are
torn easily, remove the
blanket carefully.
Since the piping ports on
the sound blanket are
torn easily, remove the
blanket carefully.
Provide a protective sheet or
a steel plate so that the
brazing flame cannot
influence peripheries.
Be careful so as not to break
the pipes by pressing it
excessively by pliers when
withdrawing it.
C a u t i o n C a u t i o n C a u t i o n
C a u t i o n C a u t i o n
Be careful about the four way
valve, pipes and so on, which
were heated up by a gas
brazing machine, so as not
to get burnt your hands.
87