Seiko C-26 Instructions Manual page 15

B
B Type
While pressing the push buttons on the both
1
sides of the flap, lift to open the clasp.
Push button
6
52
EN
● How to adjust the length of the band
While pressing the push buttons on the both
1
sides of the flap, pull the band out of the
movable loop and fixed loop. Then open the
clasp.
Buckle
Push button
Fixed loop
Movable loop
Flap
6
54
EN
Remove the pin from the adjustment hole.
2
Slide the band left and right, and insert the pin
into the adjustment hole at an appropriate
length. Push the buckle and fasten the clasp.
Buckle
Adjustment hole
Pin
Press the push buttons again to unfasten the
2
flap.
C
C Type
● How to wear or take off the watch
While pressing the push buttons on the both
1
sides of the flap, pull the band out of the
movable loop and fixed loop. Then open the
clasp.
Buckle
Push button
Fixed loop
Movable loop
Flap
Pull the pin out of an adjustment hole of the
3
band. Slide the band to adjust its length and
find an appropriate hole. Place the pin into the
hole.
Pin
Adjustment hole
Adjustment hole
Pin
Place the tip of the band into the movable loop
2
and fixed loop, and fasten the clasp by
pressing the frame of the buckle.
EN
Fasten the flap.
4
EN
6
53
6
55