Remove The Base Assembly For Vesa Mounting - Philips 242B1 User Manual

2. Setting up the monitor
2.4 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Extend the monitor base to its
maximum height.
2. Place the monitor face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
Then lift the monitor stand.
242B1H
242B1
3. While keeping the release button
pressed, tilt the base and slide it out.
242B1H
242B1
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
VESA Mounting Screw M4. Always contact
manufacturer for wall-mount installation.
242B1H
242B1
13
100mm
100mm
100mm
100mm