Table of Contents
Advertisement
VIVOTEK
Noise reduction
■ Enable noise reduction: Check to enable noise reduction in order to reduce noises and flickers
in image. This applies to the onboard 3D Noise Reduction feature. Use the pull-down menu to
adjust the reduction strength. Note that applying this function to the video channel will consume
system computing power.
3D Noise Reduction is mostly applied in low-light conditions. When enabled in a low-light
condition with fast moving objects, trails of after-images may occur. You may then select a lower
strength level or disable the function.
Note that the Preview button has been cancelled, all changes made to image settings is directly
shown on screen. You can click Restore to recall the original settings without incorporating the
changes. When completed with the settings on this page, click Save to enable the setting. You can
also click on Profile to adjust all settings above in a pop-up window for special lighting conditions.
Activated period: Select the mode this profile will apply to: Day mode, Night mode, or Schedule
mode. Please manually enter a range of time if you choose Schedule mode. Then check Save to
take effect.
Exposure
Advanced Mode
On this page, you can set the Measurement window, Exposure level, and Exposure mode. Detailed
configurations will be automatically adjusted since the sensor library will automatically adjust the
value according to the ambient light.
Measurement Window: This function allows user to set measurement window(s) for low light
compensation.
■ Full view: Calculate the full range of view and offer appropriate light compesation.
54 - User's Manual
Advertisement
Table of Contents
