Settings - AEG FFE83800PM User Manual

Programme
P5
P3
P6
P4
P8
P7
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:

6. SETTINGS

6.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The activation or deactivation of the
rinse aid empty notification.
• The level of rinse aid according to the
required dosage.
• Selection of the colour of the
TimeBeam.
• The activation or the deactivation of
the option AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
Water
1)
(l)
14 - 16
12.5 - 14.5
12 - 14
10.5
4
9.0 - 10.0
Energy
(kWh)
1.2 - 1.5
1.4 - 1.7
0.7 - 0.9
0.7
0.01
1.1 - 1.3
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
How to set the programme
selection mode
The appliance is in programme selection
mode when the display shows the
programme number P1.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously
until the appliance is in programme
selection mode.
How to enter user mode
Make sure the appliance is in
programme selection mode.
ENGLISH 9
Duration
(min)
160 - 180
170 - 190
82 - 92
38
14
230 - 250
and