Table of Contents
Advertisement
Replacing the Bench Seat
Don't put the bench seat in so it faces backward,
because it won't latch that way. If you want more
storage roo'm behind the seat, use the floor pins closer to
the front of the vehicle. See "Adjusting Rear Seats" later
in this section.
1. Place the front hooks of the bench seat latch onto the
front floor pins.
2. Push the rear hooks into the rear floor pins, then
push down on the two levers to lock the rear of the
bench in place.
3. Try to raise the bench seat to check that it is locked down.
I
I
I
A
CAUTION:
A seat that isn't locked into place properly can
move around in
a
collision or sudden stop, People
in the vehicle could be injured. Be sure to lock
the seat into place properly when installing it.
1-6
Advertisement
Table of Contents
