Bosch SGX78B55UC User Manual page 43

Issue
A different error
code appears in the
display window.
E:01-00 to E:90-10
Dishware is not dry. No rinse aid used or dosage set too low.
Cause and troubleshooting
A technical fault is present.
Press
1.
Pull out the power cord plug of the appliance or
2.
switch off the breaker.
Wait at least 2 minutes.
3.
Insert the power cord plug of the appliance in a
4.
power outlet or switch on the breaker.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press
‒
Turn off the water faucet.
‒
Pull out the power cord plug.
‒
Contact customer service → Page 53 and
‒
give the error code.
Add Rinse aid → Page 24 .
1.
Set the amount of rinse aid to be dispensed.
2.
→ "Setting the amount of rinse aid", Page 25
Cycle or cycle option has no drying phase, or dry-
ing phase is too short.
Select a wash cycle with drying. → Page 15
▶
Some option buttons decrease the drying re-
sult.
Water collects in recesses of dishware or silver-
ware.
Position dishware at an angle where possible.
▶
The combined detergent used has a poor drying
performance.
Use rinse aid to improve drying performance.
1.
Use a different combined detergent with a bet-
2.
ter drying performance.
Extra Dry not activated to improve drying perfor-
mance.
Activate Extra Dry.
▶
Troubleshooting en-us
.
⁠ .
43