Basic Use - Nokia BH-606 Manual

HS-128W_en1_with_FCC&IC_notice.fm Page 5 Thursday, September 11, 2008 12:55 PM
Switch on or off
To switch on, press and hold the power
key for about 2 seconds. The headset
beeps, and the indicator light is
displayed. The headset tries to
connect to a paired phone.
To switch off, press and hold the
power key for about 2 seconds. The
headset beeps, and the indicator light
turns off.
Pair the headset
1. Ensure that your phone is on and
the headset is off.
2. Press and hold the power key (for
about 5 seconds) until the

Basic use

Place the headset on the ear
Slide the earloop behind your ear, and
point the headset toward your mouth
ENGLISH
indicator light starts to flash
quickly.
3. Activate the Bluetooth feature on
the phone, and set it to search for
Bluetooth devices.
4. Select the headset from the list of
found devices.
5. Enter the passcode 0000 to pair
and connect the headset to your
phone. In some phones, you may
need to make the connection
separately after pairing.
When the headset is connected to
your phone and is ready for use, the
indicator light flashes about every 5
seconds.
(9 and 10). Gently push the earpiece
into your ear. To use the headset on