Your Internet Cable Is Not Plugged In Message - Linksys E9450 APAC User Manual

Your Internet cable is not plugged in
If you get a "Your Internet cable is not plugged in" message when trying to set up your router:
• Make sure that an ethernet or internet cable (or a cable like the one supplied with your router)
is securely connected to the yellow Internet port on the back of the router and to the
appropriate port on your modem. This port on the modem is usually labeled Ethernet.
• Make sure that your modem is connected to power and is turned on.
If your internet service is cable, verify that the cable modem's
CABLE port is connected to the coaxial cable provided by your
ISP.
• If your computer was previously connected to your modem with a USB cable, disconnect the
USB cable.
• Install the router again.
message
If your internet service is DSL, make sure
that the DSL phone line is connected to the
modem's DSL port.
25