Table of Contents
Advertisement
Setting the Tone
BASS:
This switch adjusts the bass level up or down.
The bottom of the digital screen will display the level
you have selected. For a normal listening level preset at
the factory, press the center of the switch.
TREB: This switch adjusts the treble level up or down.
The bottom of the digital screen will display the level
you have selected. For a normal listening level preset at
the factory, press the center of the switch.
Adjusting the Speakers
BAL: This four-way control adjusts the lefthight and
fronthear speaker balance to your individual taste.
When you change either adjustment, the bottom of the
digital screen will display the point of balance you have
selected. For the normal setting preset at the factory,
press the left and right or front and rear buttons at the
same time.
To Play a Compact Disc
Don't use mini-discs that are called singles. They won't
eject. Use only full-size compact discs.
1. Press POWER to turn the radio on.
2. Insert a disc part-way into the slot, with the label
side up. The player will pull it in. In a few seconds,
the disc should play.
If the disc comes back out:
0
The disc may be upside down.
0
The disc may be dirty, scratched or wet.
There may be too much moisture in the air (wait
The player may be too hot, or the road may be too
rough for the disc to play. If the word HOT appears
on the display, the player is too hot. Press RCL to
remove HOT from the display. As soon as things get
back to normal, the disc should play.
about one hour and try again).
While a disc is playing, the CD indicator is displayed on
the digital screen, as is the clock.
Many of the controls for the radio also have functions
for the compact disc player, as explained here.
3-16
Advertisement
Table of Contents
