IMPORTANT: Read these instructions for use carefully. Familiarise yourself with the appliance before connecting it to its gas container. Keep these instructions for future reference. GENERAL WARNINGS SAFETY INFORMATION This appliance shall only be used with a ULPG refillable Inspect the appliance regularly for signs of wear, leaks cylinder certified to Standard AS 2469 that has a 3/8"...
2-BURNER LP GAS STOVE OWNERS MANUAL CARBON MONOXIDE HAZARD Using this appliance in an enclosed space may cause DEATH. Do not use in caravans, tents, marine craft, cars, mobile homes or similar locations. Only use the hose assembly supplied with this appliance for connection to the cylinder - DO NOT USE ADAPTORS.
Page 4
UNDERSTANDING YOUR APPLIANCE WINDSHIELD BURNER STOVE CONNECTION TRIVET STAND ADJUSTABLE GAS CONTROL GAS HOSE...
Page 5
2-BURNER LP GAS STOVE OWNERS MANUAL CONNECTION Your stove is designed to connect directly on to a 3/8 " LH BSP camping gas cylinder using the specially designed LP Gas hose supplied with the appliance. Check that the gas controls are in the OFF position (turned fully clockwise).
NEVER check for leaks with a flame or pilot light. Example 1 Check for leaks using Companion Gas Leak Detection Spray or soapy water, coat all connections, if bubbles appear turn the cylinder gas control off and re-tighten the connection before re-testing.
Page 7
2-BURNER LP GAS STOVE OWNERS MANUAL IMPORTANT INFORMATION FOR USE During operation all surfaces will be extremely hot and should not be touched or handled. Take care that the primary air intakes, located on the burner tube of this appliance are not obstructed, or that air flow is restricted by placing items or other appliances close to or adjacent to the inlets.
LIGHTING THE BURNER Step 1. Check that the gas control is shut off, then Step 3. If the burner does not ignite, turn the gas turn the gas cylinder valve on in an anti-clockwise control in the clockwise direction to the OFF position direction for one full turn.
2-BURNER LP GAS STOVE OWNERS MANUAL ADJUSTING THE FLAME TURNING THE APPLIANCE OFF Turn the gas control in an anti-clockwise direction to If the appliance is no longer to be used and to reduce the achieve a higher flame and in the clockwise direction risk of blocked gas jets caused by excess gas being left for a lower flame.
CARE INSTRUCTIONS SPECIFICATIONS Your appliance is manufactured with a hard wearing Part no. COMP203 powder coated finish on the cabinet, chrome plated Model 2-Burner LP Gas Stove burners and trivet and is easy to clean. Gas type ULPG Gas jet size Large: 0.18 mm Medium: 0.15 mm Using warm soapy water with a mild detergent wipe...
Need help?
Do you have a question about the COMP202 and is the answer not in the manual?
Questions and answers