Williams RHAPSODY III Owner's Manual page 5

STEP 5 - Screw the modestly panel
into the brackets and legs
using the pre-drilled holes
and included screws with
washers E (M4X10).
The vanity board should
be on the front side of
the brackets, and screws
should enter through the
front side of the piano.
STEP 6 - Place the main piano
section on top of the legs.
Locate the two large
screws F (M6X20) on
the bottom of the piano
console, located toward
the rear. Slip these
protruding screws into the
U-shaped brackets toward
the rear of the stand. Use
one F (M6X20) screw to
secure each front bracket.
Tighten all 4 screws.
W ILLIAM S P IAN OS. CO M
R H APSO DY I I I D I G ITAL P IAN O
5