System Information - Dell Vostro 5390 Setup And Specifications Manual

Table 28. General (continued)
Option
Boot Sequence
Advanced Boot Options
UEFI Boot Path Security
Date/Time
.

System information

Table 29. System Configuration
Option
Integrated NIC
SATA Operation
Drives
Smart Reporting
USB Configuration
Audio
Miscellaneous Devices
Description
Allows you to specify the order in which the computer attempts to find an operating system
from the devices specified in this list.
Allows you to select the Legacy Option ROMs option, when in UEFI boot mode. By default,
no option is selected.
● Enable Legacy Option ROMs
● Enable Attempt Legacy Boot
This option controls whether or not the system will prompt the user to enter the Admin
password when booting a UEFI boot path from the F12 Boot Menu.
● Always, Except Internal HDD—Default
● Always
● Never
Allows you to set the date and time settings. Changes to the system date and time take
effect immediately.
Description
Allows you to configure the on-board LAN controller.
● Disabled = The internal LAN is off and not visible to the operating system.
● Enabled = The internal LAN is enabled.
● Enabled w/PXE = The internal LAN is enabled (with PXE boot) (selected by default)
Allows you to configure the operating mode of the integrated hard drive controller.
● Disabled = The SATA controllers are hidden
● AHCI = SATA is configured for AHCI mode
● RAID ON = SATA is configured to support RAID mode (selected by default)
Allows you to enable or disable the various drives on-board:
● SATA-0 (enabled by default)
● SATA-1 (enabled by default)
● SATA-2 (enabled by default)
● M.2 PCIe SSD-0 (enabled by default)
This field controls whether hard drive errors for integrated drives are reported during system
startup. The Enable Smart Reporting option is disabled by default.
Allows you to enable or disable the integrated USB controller for:
● Enable USB Boot Support
● Enable External USB Port
All the options are enabled by default.
Allows you to enable or disable the integrated audio controller. The option Enable Audio is
selected by default.
● Enable Microphone
● Enable Internal Speaker
Both the options are selected by default.
Allows you to enable or disable the following devices:
● Enable Camera (enabled by default)
BIOS setup 25