Panasonic WH-ADC1216H6E5 Service Manual page 5

Item
Protection Device
Volume
Expansion Vessel
MWP
Capacity of Integrated Electric Heater / OLP TEMP
Tank Volume (Spec / Nett)
Max. Tank Water Set Temperature
Tank Coil Surface
Maximum Working
Pressure
Operating Pressure
Expansion Vessel Pre-charge Pressure (DHW Circuit)
Pressure Reducing Valve Set Pressure (DHW Circuit)
Pressure Vessel
Heat Exchanger
Note:

Cooling capacities are based on outdoor air temperature of 35°C Dry Bulb with controlled indoor water inlet
temperature of 12°C and water outlet temperature of 7°C.

Heating capacities are based on outdoor air temperature of 7°C Dry Bulb (44.6°F Dry Bulb), 6°C Wet Bulb
(42.8°F Wet Bulb) with controlled indoor water inlet temperature of 30°C and water outlet temperature of 35°C.

Specifications are subjected to change without prior notice for further improvement.

* Above 55°C, only possible with backup heater operation.
Heat / Cool
Tank Circuit
Tank Unit
Expansion Relief Valve
Material
Volume
Design Pressure
Material
Diameter
Thickness
Surface Area
Total Length
Unit
A Residual Current Circuit Breaker (30-40)
I
bar
kW / °C
L
°C
2
m
Bar
Bar
Bar
Bar
Bar
Bar
L
Bar
mm
mm
2
m
m
Indoor Unit
10
3
6.00 / 80
200 / 185
65
1.8
3.0
8.0
3.5
8.0
3.5
3.5
En-1.4521
185
10
EN-1.4162 / EN-1.4521
22
0.8
1.8
25