Bucher Hydraulics NS 32 Quick Start Manual

Leak-Free Load-Control Valves NS 32
Q = 1000 l/min [265 gpm], p
max
Seat-valve, two-stage hydraulic, cartridge design
Series CINDY 32-B-C...
1 Description
Whenever large loads are to be precisely moved, placed
and held, when work access platforms must maintain their
position, or when hydraulic presses gates need to withstand
high forces, then CINDY load-control valves from Bucher
Hydraulics are the right solution.
Load-control valves in this series prevent hydraulic actua­
tors from running ahead of the available oil supply.
2 Symbol
Variant A
Influenced by return-line pressure
(pressure in A is additive to opening pilot pressure).
X
Issue: 10.2016
= 420 bar [6000 psi]
max
A
B
S Two-stage load-control valve and bypass check valve
are functionally combined in one coaxial valve assembly
S Leak-free load holding
S Pilot ratio 1:113
S The control assembly is guaranteed to close
→ it closes even with a broken spring
S Various pilot-pressure ranges can be chosen
S All exposed parts with zinc-nickel plating
S Various types of pilot control, matched to your system,
can be supplied
S Low-noise operation thanks to specially shaped control
grooves
In one valve, they combine the functions of load-holding,
safety and pipe-rupture protection. Leak-free load-control
valves in this series are ideally suited for use in high pres­
sure applications up to 420 bar (6000 psi) with a safety fac­
tor of at least 3.
With a variety of optional components, the range can be ex­
tended and adapted to the requirements of the system.
Variant L
Not influenced by return-line pressure
(drain line is required).
L
X
Reference: 300-P-9050099-EN-02
A
B
1/9