Controls in detail
Useful features
Reprogramming a single integrated
signal transmitter button
To program a device using a signal trans-
mitter button previously trained, follow
these steps:
Press and hold desired signal transmit-
ter button (1, 2 or 3). Do not re-
lease the button.
The indicator lamp will begin to flash af-
ter 20 seconds. Without releasing the
integrated signal transmitter button,
proceed with programming starting
with step 3.
270
Heated steering wheel*
(SLK 350, Canada only)
The steering wheel heating warms up the
leather area of the steering wheel.
The lever is on the lower left-hand side of
the steering wheel.
1 Switching on
2 Indicator lamp
3 Switching off
Switching on
Switch on the ignition ( page 35).
Turn switch at tip of lever in direction of
arrow 1 and release it.
Indicator lamp 2 comes on.
The steering wheel heating switches
on.
Switching off
Turn switch at tip of lever in direction of
arrow 3 and release it.
The steering wheel heating switches
off.
Indicator lamp 2 goes out.
i
The heating of the steering wheel de-
pends on the current temperature.
The steering wheel heating switches off
automatically when you remove the
SmartKey from the starter switch.