Mazda 2002 626 Owner's Manual page 94

J94S.book Page 14 Saturday, June 23, 2001 1:04 PM
Driving Your Mazda
Starting and Driving
M M M M To Set Speed
1. Turn on the CRUISE MAIN switch.
2. Accelerate to the desired speed, which
must be more than 40 km/h (25 mph).
3. Press the SET/COAST button and
release it at the speed you want.
Release the accelerator at the same
time.
Don't continue to hold in the button.
Until you release it, speed will
continue to drop (unless you continue
to accelerate) and you'll miss the
desired speed.
NOTE
• The SET function can't be activated
until about 2 seconds after the
CRUISE MAIN switch has been
engaged.
• On a steep grade, the vehicle may
momentarily slow down going up or
speed up while going down.
5-14
Form No. 8Q50-EA-01G
M M M M To Increase Cruising Speed
Follow either of these procedures.
• Press the RESUME/ACCEL button
and hold it. Your vehicle will
accelerate.
Release the button at the speed you
want.
Your vehicle has a tap-up feature that
allows you to increase your current
speed in increments of 1.6 km/h (1
mph) by a momentary tap of the
RESUME/ACCEL button. Multiple
taps will increase your vehicle speed
1.6 km/h (1 mph) for each tap.
• Accelerate to the desired speed.
Press the SET/COAST button and
release it immediately.