Mazda 2002 626 Owner's Manual page 91

J94S.book Page 11 Saturday, June 23, 2001 1:04 PM
M M M M Overdrive
Overdrive operation
In D, the transaxle automatically shifts to
overdrive, which improves fuel economy
and reduces noise.
To allow engine braking when going
down a steep grade, make sure the
overdrive button is in the off position.
Overdrive button
And for a smoother ride with less shifting,
don't use it when:
• Going up a steep grade.
• Driving in stop-and-go traffic.
• Pulling heavy loads.
To turn off the overdrive, push the
button.
The transaxle will then shift through a
three-gear sequence in D.
Shift patterns without overdrive:
D
Without Traction
Control System
2
With Traction
Control System
1
Form No. 8Q50-EA-01G
To turn it on, push the button again.
Shift patterns with overdrive:
2
O/D OFF indicator light
This light comes on when the overdrive
has been turned off.
If the overdrive-off indicator light
flashes, the transaxle has an electrical
problem. Continuing to drive your
Mazda in this condition could cause
damage to your transaxle. Consult an
Authorized Mazda Dealer as soon as
possible.
1st, 2nd, 3rd
2nd
1st, 2nd
1st
Driving Your Mazda
Starting and Driving
D 1st, 2nd, 3rd, 4th
Without Traction
2nd
Control System
With Traction
1st, 2nd
Control System
1 1st
CAUTION
5-11