Stealth Cam Reactor Instruction Manual page 18

Cellular Settings
UPLOAD RESOLUTION: This setting will determine
the megapixel (MP) resolution of each upload. A
higher MP count will result in better uploads and take
more cellular data. You will have the option to upload
a higher resolution photo or full video at a one time
cost.
OPTIONS: 1024 x 576
UPLOAD FREQUENCY: This setting changes how
often photos are uploaded to your phone. Videos
taken will upload as a 3 frame preview. Full video is
saved on your SD card.
NOTE: This setting has a large effect on your Data
and Battery usage.
OPTIONS:
INSTANT (Least Efficient): As soon as your
sensor detects motion it will take a photo and
upload.
INSTANT GROUP: Similar to instant, if motion
is detected within 10 seconds of original photo,
camera will continue to take photos until motion
ceases before uploading.
HOURLY: Camera will upload photos every
hour.
TWICE PER DAY: Camera will upload twice per
day, based on upload time.
i.e. If upload time is set to 5:00 PM, camera will
upload at 5:00AM and 5:00 PM
ONCE PER DAY (Most Efficient): Camera will
upload photos once per day, based on upload
time.
Page 18
UPLOAD TIME: This setting will allow you to set
the time that you would like your camera to upload
photos.
NOTE: Your camera will take a Daily Test Photo
each day at the set Upload Time. This photo
will be indicated with a "D" in the info bar.
TRANSMIT FILES: This setting allows you to turn your
data transmission on and off. While data transmission
is off, no photos will be sent on your cellular data plan.
NOTE: When Transmit Files is turned off. Camera will
connect once a day at set Upload Time to check for
any setting changes.
OPTIONS: On | Off
IMEI: This number is used to reference your
physical camera.
ICCID: This number is used to reference your
camera's SIM card.