TDX Service Tool
Input window
Click the Input tab in the TDX Service Tool to display the Input window.
The first time you display the Input window in a new configuration the
module list only displays the number and type of input modules that you hH-
DMIe inserted in the main and subunits.
You hHDMIe to configure the input modules individually.
To display the Configuration window, click the Setup button of the
DVB-T input module you want to configure.
DVB-T2 is supported from release 1.13.1.x
DVB-C is supported from release 1.14.1.x
- you can see the software version of each module in the "Status information
area" at the bottom of the window - please see next page
9