Honda 2009 Civic Owner's Manual page 154

Main Menu
SEEK The seek function
−
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press and hold the or
▲ ▼
the TUNE bar until you hear a beep,
then release it.
The scan function samples
SCAN −
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 10 seconds.
Table Of Contents
If you do nothing, the system will
then scan for the next strong station
and play it for 10 seconds. When it
plays a station you want to listen to,
side of press the SCAN button again.
Each preset button can
Preset −
store one frequency on AM and two
frequencies on FM.
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
2. Use the tune, seek, or scan
function to tune the radio to a
desired station.
3. Pick a preset button, and hold it
until you hear a beep.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
2009 Civic Sedan
Audio System (Models with navigation system)
Each preset button's frequency is
shown on the bottom of the audio
display.
CONTINUED
151