Honda 2008 Accord Owner's Manual page 337

Main Menu
Lights
Insert the socket back into the
5.
headlight assembly. Turn it
clockwise to lock it in place.
6. Turn on the lights to make sure
the new bulb is working.
7. Reinstall the inner fender cover.
Then reinstall the holding clips,
and lock them in place by pushing
on their centers.
334
Table Of Contents
Replacing Rear Bulbs
1. Open the trunk.
Remove the screw in the center of
the fastener on the side of the
trunk lining. Pull the lining back.
2. Determine which of the three
bulbs is burned out: stop/taillight,
back-up light or turn signal light.
2008 Accord Sedan
SCREW
BULB
SOCKET
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
5. Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.