Video Screen - GMC 2003 Yukon Owner's Manual

DVD Messages
The following errors may be displayed on the video
screen:
•
Disc Format Error: This message will be displayed
if a disc is inserted upside down, if the disc is not
able to be read or if the disc format is not
compatible with the DVD player.
•
Load/Eject Error: This message will be displayed if
the disc is not properly loaded or ejected.
•
Disc Play Error: This message will be displayed if
the DVD player can not play the disc. Severely
damaged discs will cause this error.
•
Region Code Error: This message will be
displayed if the region code of the DVD is not
compatible with the DVD player.
•
No Disc: This message will be displayed if the
PLAY button is pressed and no disc is in the player.
Parental Control Button: This button is located on the
front of the DVD console, behind the video screen,
near the driver of the vehicle. Press this button while a
DVD or CD is playing to freeze the video and mute
the audio. The video screen will display Parental Control
ON and the power indicator light on the DVD player
will flash. It will also disable all other button operations
from the remote control and the DVD player, with
3-114
the exception of the eject button. The driver will then be
able to gain the attention of the rear seat passengers.
Press this button again to restore normal operation
of the DVD player.
This button may also be used to turn the DVD player
power on and automatically resume play if the vehicle is
in an enabled power mode.

Video Screen

The video screen is located in the overhead console. To
use the video screen, push forward on the release
latch and the screen will fold down. Adjust the screen's
position as desired. When the video screen is not in
use, push it up into its latched position.
The DVD player and display will continue to operate
when the screen is in either the up or the down position.
The video screen contains the infrared transmitters for
the wireless headphones and the infrared receiver
for the remote control. If the screen is in the closed
position, the infrared signals will not be available for the
operation of the headphones and the remote control.
Notice: Avoid directly touching the video screen, as
damage may occur. See Cleaning the Video Screen
on page 3-126 for more information.