Turn Signal/Multifunction Lever - GMC 2003 Yukon Owner's Manual

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
G
•
Turn and Lane Change Signals
3
•
Headlamp High/Low Beam Changer
•
Flash-to-Pass Feature
N
•
Windshield Wipers
L
•
Windshield Washer
J
•
Cruise Control (If Equipped)
For information on the exterior lamps, see Exterior
Lamps on page 3-14 earlier in this section.
3-8
Turn and Lane-Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return
automatically.
An arrow on the instrument panel cluster will flash in the
direction of the turn or lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by itself
when you release it.
If you move the lever all the way up or down, and the
arrow flashes at twice the normal rate, a signal bulb may
be burned out and other drivers may not see your
turn signal.