2: Getting Started; Tools & Supplies Required; Inspect The Appliance & Components - Homecrest NF-16 User Manual

DANGER
WARNING
CAUTION
ASpHyxIATION RISk:
• This gas appliance is for outdoor use in a
NOTICE
well-ventilated space.
• This unit must not be installed inside an enclosed
structure or unvented appliance.
DANGER
WARNING
CAUTION
DO NOT use this appliance if any part of it has been
underwater. Have a qualified service technician inspect
DANGER
the appliance and replace any part of the control system
NOTICE
and any gas control which has been underwater.
WARNING
CAUTION
SHARp eDgeS:
NOTICE
Wear protective gloves and safety glasses during
installation.
DANGER
WARNING
CAUTION
DO NOT burn solid fuels in this gas appliance. DANGER
NOTICE
WARNING
CAUTION
Inspect appliance and components for damage. Damaged
parts may impair safe operation.
• DO NOT install damaged, incomplete, or substitute
NOTICE
components.
• Report damaged parts to your dealer.
DANGER
WARNING
CAUTION
Homecrest Outdoor Living disclaims
any responsibility for, and the warranty will be
voided by, the following actions:
NOTICE
• Installation and use of any damaged
components.
• Modification of the burner assembly.
• Installation other than as instructed by Homecrest
Outdoor Living.
ANy SUCH ACTION MAy CAUSe A fIRe HAzARD.
getting started
This appliance is a Decorative Gas Appliance for OUTDOOR
USe ONLy and MUST NOT be used for cooking.
Place the Crystal Fire/Crystal Fire Plus burner on a flat and
stable surface in an outdoor location such as a patio or
deck. This location must be adjacent to the gas supply line
or LP gas supply cylinder. DO NOT locate the appliance where
it will get excessively wet or submerged in water.
a. tools & supplies required
Before beginning the installation, be sure that the following
tools and supplies are at hand:
• Work gloves
• safety glasses
• Utility knife (for opening packaging)
• (2X) Adjustable wrenches
• 11mm wrench (for NG conversion only)
• 10mm wrench
• Phillips screwdriver
• Flat-blade screwdriver (for NG conversion only)
• Corrosion-free leak test solution
• (1X) AAA battery
b. inspect the appliance & components
• Carefully remove all burner components from packaging.
• Read all instructions before beginning installation.
Follow these instructions carefully during installation to
ensure maximum safety and benefit.
2
Fire Table Manual | 7