Standard Equipment And Specifications - Bush Hog 2047 Operator's Manual

Standard Equipment and Specifications

1.
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader
equipped with a 48" bucket, external hydraulic system of 4.75 GPM with engine operating at 2800 RPM and
relief setting of 2000 PSI.
Horsepower Range
System pressure/flow rate
Lift Capacity to maximum height
Breakout force at pivot pin
Rollback force at ground line
Total weight with bucket (approx.)
Raising time to full height
Lower time
Attachment dump time
Attachment rollback time
Hydraulic system flow
System pressure at rated flow
Lift Cylinders number and type
Dump Cylinders number and type
A. Maximum Lift Height at Pivot Pin
B. Maximum Height Under Bucket
C. Clearance with Bucket Dumped
D. Reach at Maximum Height
E. Maximum Dump Angle
F. Reach with Attachment on Ground
G. Attachment Rollback Angle
H. Digging Depth
I. Overall Height in Carry Position
(Manufacturers estimated specifications and design subject to change without notice.)
1947/2047 01/11
© 2011 Alamo Group Inc.
OPERATION
1947
10-20 HP
2000 PSI/ 5 GPM
550 lbs.
1711 lbs.
1074 lbs.
662 lbs.
3.4 sec.
2.2 sec.
3.3 sec.
3.1 sec.
5 GPM
2000 PSI
two, 1-1/2 Dia. D/A
two, 1-1/2 Dia. D/A
76"
71"
57"
22"
44°
53"
22°
4"
47"
Operation Section 4-3
2047
10-20 HP
2000 PSI/ 5 GPM
570 lbs.
1472 lbs.
902 lbs.
662 lbs.
3.4 sec.
2.2 sec.
3.3 sec.
3.1 sec.
5 GPM
2000 PSI
two, 1-1/2 Dia. D/A
two, 1-1/2 Dia. D/A
77"
71"
57"
22"
43°
54"
21°
4"
48"