Windshield Wipers - GMC 1999 Envoy Owner's Manual

If your headlamps are in the automatic position or on
-
low beam, your high beam headlamps will turn on.
They'll stay on as long as you hold the lever toward you
-
and the high beam indicator on the dash will come on.
Release the lever to return to normal operation.

Windshield Wipers

You control the windshield wipers by turning the band
with the wiper symbol on it.
For a single wiping cycle, turn the band to MIST. Hold
it there until the wipers start, then let go. The wipers will
stop after one wipe. If you want more wipes, hold the
band on MIST longer.
You can set the wiper speed for a long or short delay
between wipes. This can be very useful in light rain or
snow. Turn the band to choose the delay time. The
closer to LO, the shorter the delay.
For steady wiping at low speed, turn the band away
from you to the LO position. For high
turn the band further, to HI. To stop the wipers, turn the
band to the OFF position.
Be sure to clear ice and snow from the wiper blades
before using them. If they're frozen to the windshield,
carefully loosen or thaw them. If your blades do become
worn or damaged, get new blades or blade inserts.
yellowblue
-
speed wiping,
2-35