Panasonic CS-E7JKEW Service Manual page 100
Hide thumbs
Also See for CS-E7JKEW:
- Operating instructions manual (76 pages) ,
- Operating instructions manual (76 pages)
Table of Contents
Advertisement
16.4.19. H98 (Indoor High Pressure Protection)
Error Code will not display (no Timer LED blinking) but store in EEPROM
Malfunction Decision Conditions
During heating operation, the temperature detected by the indoor pipe temperature sensor is above 60°C.
Malfunction Caused
• Clogged air filter of the indoor unit
• Dust accumulation on the indoor unit heat exchanger
• Air short circuit
• Detection error due to faulty indoor pipe temperature sensor
• Detection error due to faulty indoor unit PCB
Troubleshooting
100
Hide quick links:
Advertisement
Table of Contents
