Advertisement
4.10.
TRIGGER OPERATION
4.10.1.
The rotational speed can be controlled by the trigger (fi g 3 - 3). Pull the trigger slightly for low rotational speed. To increase the
speed pull further on the trigger.
4.11.
BATTERY POWER INDICATOR
4.12.
When all the battery indicator lights (fi g 4 - 5) are on the battery is at full charge.
5. MAINTENANCE
5.1.
Use a clean cloth to remove dirt, dust oil, grease etc.
DO NOT use solvents to clean the nut riveter.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
CP316 Issue 1 16/03/21
Advertisement
