Clearing The System - Chevrolet 2009 Equinox Owner's Manual

Sending a Number During a Call
b g
1. Press . The system responds with "Ready"
followed by a tone.
2. Say "Dial". The system responds with "Say a
number to send tones" followed by a tone.
3. Say the number to send.
•
If the system clearly recognizes the number it
responds with "OK, Sending Number" and the
dial tones are sent and the call continues.
•
If the system is not sure it recognized the
number properly, it responds "Dial Number,
Please say yes or no?" followed by a tone.
If the number is correct, say "Yes". The system
responds with "OK, Sending Number" and
the dial tones are sent and the call continues.
Sending a Stored Name Tag During a Call
b g
1. Press . The system responds with "Ready"
followed by a tone.
2. Say "Send name tag." The system responds with
"Say a name tag to send tones" followed by a tone.
3. Say the name tag to send.
•
If the system clearly recognizes the name tag it
responds with "OK, Sending <name tag>" and
the dial tones are sent and the call continues.
•
If the system is not sure it recognized the
name tag properly, it responds "Dial <name tag>,
Please say yes or no?" followed by a tone. If the
name tag is correct, say "Yes". The system
responds with "OK, Sending <name tag>" and
the dial tones are sent and the call continues.

Clearing the System

Unless information is deleted out of the in-vehicle
Bluetooth system, it will be retained indefinitely.
This includes all saved name tags in the phonebook
and phone pairing information. For information on how
to delete this information, see the above sections on
Deleting a Paired Phone and Deleting Name Tags.
3-107