Advertisement
USER MANUAL
ANKERBOX
1
Getting Started
① Plug one end of the AC adapter into the power port,
and the other end into the power outlet.
② Tie up the power cable and fix it.
③ Press the AC power button to power on the AnkerBox.
Wi-Fi Settings
① Download USR Simplecofig App from the App Store
(iOS devices running 10.0 and later versions).
② Open the app and choose Configure New Device.
Select the AP you want to configure, and connect.
③ Follow the onscreen instructions to finish the Wi-Fi
setup.
Wi-Fi or 4G network
Off
disconnected
QR code
backlight
Connected to Wi-Fi / 4G
Solid white
network
Loading the Ankerbox with PowerBank
① Press Return button on the AnkerBox.
The corresponding LED indicator flashes green.
② Insert the PowerBank into the slot with an indicator
that flashes green.
③ Repeat the steps above to insert the PowerBank
batteries into all the slots.
Using the AnkerBox
Rent a Battery
① Scan the QR code to rent a battery. A battery will
pop out, and the corresponding LED indicator will
flash green.
② Take the battery away. The LED indicator will go off.
01
Product Number: A2850
02
5100500XXXX V01
03
Advertisement
Table of Contents
Related Manuals for Anker AnkerBox
Summary of Contents for Anker AnkerBox
- Page 1 ③ Repeat the steps above to insert the PowerBank batteries into all the slots. ANKERBOX ③ Press the AC power button to power on the AnkerBox. Using the AnkerBox Rent a Battery ① Scan the QR code to rent a battery. A battery will pop out, and the corresponding LED indicator will flash green.
- Page 2 Hereby, Anker Innovations Limited declares that the This equipment generates, uses, and can radiate radio • The battery cannot be re-rented: the battery should not be cause for concern.
Need help?
Do you have a question about the AnkerBox and is the answer not in the manual?
Questions and answers