Advertisement
1. Fasten the three fittings (2) each with a screw (3), a washer (4), a spring washer (5) and a
nut (6) on the fire ring (1).
2. Fasten the motor bracket (7) to the fire ring (1) with two screws (8), two washers (10) and two
nuts (9).
3. Put the two parts of the spit (11, 12) together.
4. Your grill spit is now ready to use.
Commissioning
1. Light the grill.
2. Place the electric motor in the motor bracket and connect it to a socket.
3. Place the fire ring on the lower part of the grill.
4. Attach a meat fork (13) to the spit and screw it in the desired position using the wing nut.
5. Spear a piece of meat with the fork so that it is held by one end.
6. Attach the second meat fork to the spit and push it so that the meat piece is held on both sides.
Tighten the fork in this position with a wing screw.
7. Slide the roller onto the spit and screw it onto it.
8. Insert one end of the spit into the appropriate place in the electric motor.
9. Place the other end of the spit so that the roll rests on the edge of the fire ring.
10. Place the grill lid on the fire ring.
11. Switch on the electric motor.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 51766
Page 5
10
2021-1
Advertisement
