System Information; Resetting To Defaults; Updating Mywirelesstv Firmware - ActionTec MyWirelessTV 2 User Manual

3.1.5. System Information

System information, such as model name, version number, connection state, and signal
strength, are displayed at the lower part of the Main Menu screen.
Model name. It indicates the model name of the receiver.

Version number. It indicates the firmware version of the transmitter and receiver.

Connection state. It indicates the connected transmitter or the disconnected state.

Signal strength. It indicates the strength of WiFi signal. The more blue bars display,

the stronger the signal is.

3.2. Resetting to Defaults

To reset the Receiver to factory defaults, press and hold the MENU button on the Receiver
for more than five (5) seconds and then release the button. The Restore Defaults screen
will be displayed. The receiver reboots automatically to restore factory default settings.
Note: After the factory reset, you need to re-pair the two devices.

3.3. Updating MyWirelessTV Firmware

Actiontec recommends that all MyWirelessTV users update their device with the latest
firmware update to take advantage of recently developed performance enhancements, new
features, and bug fixes. Check the current firmware version number on the Main Menu
Screen (pressing the MENU button on the Receiver). Compare this version number with the
latest version available at http://www.actiontec.com/mwtv2. If the version on your
MyWirelessTV device is older, perform the following procedure.
To update the firmware on your MyWirelessTV devices:
1. Using a web browser, go to http://www.actiontec.com/mwtv2.
13