Advertisement
Quick Links
Advertisement
Related Manuals for MachineryHouse DC-1
Summary of Contents for MachineryHouse DC-1
- Page 1 W392 16/12/09 DUST COLLECTOR DC-1 INSTRUCTION MANUAL...
-
Page 2: Dear Customer
Dear customer, we wish you a pleasant and successful working experience with your new machine. We recommend that you read through the entire operating instructions before putting into operation. Read the instructions manual: Before installing, putting into use or undertaking work on the compressor, read the instructions manual carefully. - Page 3 General Notes After unpacking, check all parts for any transport damage. Inform the supplier immediately of any faults. Later complaints cannot be considered. Make sure the delivery is complete. Before putting into operation, familiarize yourself with the machine by carefully reading these instructions. Scope of delivery Exhaust system Exhaust hose...
- Page 4 Components 1. Motor casing 2. Shavings container On/off switch Locking strap Exhaust hose Hose clamps Hose coupling Fig.1 General Information Check all parts after unpacking for possible transportation damages. Check if all parts are delivered. Use the operating instructions to make yourself be familiar with the device before use.
- Page 5 Keep children away from the machine when it is connected to the power supply. Installation, repairs and maintenance work of the electrical installation may only be carried out by quali ed personnel. fi Switch machine off before correcting faults. Disconnect the mains plug. Maintenance work or replacing the bag, the filter, or the hose must only be conducted with the mains plug disconnected from the power supply.
- Page 6 from the manufacturer. Only for collecting shavings (not dust). The manufacture‘s safety, working, and maintenance instructions, as well as the dimensions stated in the technical specifications, must be observed. The applicable accident prevention regulations and other generally accepted rules concerning safety must be obeyed. The machine may only be operated, serviced, or repaired by persons familiar with it and aware of the risks.
- Page 7 Assembly For packaging reasons your machine is not entirely assembled. Take the exhaust system out of the packing. Release the locking strap and remove the motor casing. Fig.2 In the container you will Find all the components of the exhaust system. Take all parts out and check for completeness.
- Page 8 Fig.5 Now plug the Filter cartridge 1 onto the motor casing 2. Place the entire motor casing on the container and secure with the locking strap. Fig.5 fig.6 Mount the exhaust hose. Fig.6 Fig.7 Attach the other end of the exhaust hose using a hose clamp and hose coupling .
-
Page 9: Important Notes
Electrical Connection Connecting the electrical equipment, or any repair work, may only be carried out by a quali ed e lectrician. The built-in electric motor is fi already connected and ready for operation. The connection to the mains supply made by the customer, as well as the extension cord used, must comply with these regulations. - Page 10 AC Motor The power supply must be 240 V/ 50 Hz. The connection to the power supply must be protected with a 16 A (delayed-action) fuse/ circuit breaker.
- Page 11 Parts’ Diagram...
- Page 12 Parts’ List ITEM NAME Shavings container Locking strap Cartridge filter Motor Screw ST5.5X15 Container lid Screw M5x10 long sponge round sponge Right motor casing Screw M5x45 Screw M5x25 M5 nut (black) Left motor casing Cable On/off switch Cable gland Ø5 Spring washer Ø5 washer Rubber cushion Filter bag...
Need help?
Do you have a question about the DC-1 and is the answer not in the manual?
Questions and answers