Sony VAIO VGC-RA910G Quick Start Manual page 33

Configuring speaker systems
When using 5.1 (digital or analog) speaker systems, certain software programs require setting changes to enable proper
audio performance.
To change audio settings (6 channel-analog) in RealTek
1.
Click Start in the Windows
2.
Click Sounds, Speech, and Audio Devices, and then click Sound Effect Manager.
The Sound Effect Manager window appears.
3.
Click Speaker Configuration.
4.
From the drop-down menu on the left, select 6CH Speaker.
5.
Close the Sound Effect Manager window.
To change audio settings (6 channel-digital) in RealTek
1.
Click Start in the Windows
2. Click Switch to Classic View, and then click Sound Effect Manager.
The Sound Effect Manager window appears.
3.
Click Speaker Configuration.
4.
From the drop-down menu on the left, select Dolby Digital 5.1.
5. Close the Sound Effect Manager window.
To change audio settings in Media Center
Your computer's factory default settings for audio can be changed using the Media Center Settings feature. You can switch
between 2-channel, 6-channel, or S/PDIF output modes.
1.
Use the Media Center remote control, your keyboard, or mouse, to start the Media Center software program.
2.
Select Settings.
The Settings window appears.
3.
From the Settings window, select DVD.
The DVD Settings window appears.
4.
Select Audio.
The Properties window appears.
5.
From the iviaudio tab, select 6 speaker mode.
To enable S/PDIF output, select Enable SPDIF output.
6. Click OK.
To change audio settings in the WinDVD software program
1.
Click Start in the Windows
2.
Point to InterVideo WindDVD 5, and the click on InterVideo WinDVD 5 for VAIO.
The WinDVD window opens.
taskbar, and then click Control Panel.
®
taskbar, and then click Control Panel.
®
taskbar, and point to All Programs.
®
Sound Effect Manager
®
Sound Effect Manager
®
Page 33