Table of Contents
Advertisement
Changing TV Recording Settings
You can change your TV recording priorities and options.
1.
Point the remote control at the remote sensor, and press the Start
The Media Center Start menu appears.
2.
Use the arrow buttons on the remote control to select Settings and press OK.
The Settings window appears.
3.
From the Settings window, select TV, and then select Recorder, pressing OK after each selection.
The Television Recorder Settings window appears.
Media Center — Recorder
4.
View the recording status, or change the settings for these options:
History — Review a list of your recorded programs, and sort the list by date, status, or name.
Recorder storage — Change the settings that control recording space. See the section,
space for recorded TV programs.
Recording defaults — Customize the general recording settings to change how and when your TV
programs are recorded.
5.
After changing these settings, press Back on the remote control twice to return to the Settings window.
About storage space for recorded TV programs
The amount of storage space available for TV recording is based on your hard disk dive size, allocation, and the recording
quality settings. Your computer requires space to run the operating system, software programs, and store data files. Your
computer's performance is affected when the hard disk drive becomes full.
You can free up hard disk space to record more programs or to improve your computer's speed and performance with these
options.
Delete recorded TV programs from the Recorded TV window. For more information, see
Increase the percentage of hard disk space allocated for recording TV programs. Go to the Recorder storage
window and set a disk allocation of between 5 and 90 percent.
Record your TV programs to the largest drive partition.
Media Center does not support recording to removable drives, network drives, or drives with less than 5 MB of
available space.
button.
About storage
Recording TV Programs.
Page 147
Advertisement
Table of Contents
