Advertisement
Quick Links
Advertisement
Related Manuals for Bartels Mikrotechnik mpSmart-Lowdosing
Summary of Contents for Bartels Mikrotechnik mpSmart-Lowdosing
- Page 1 Flow Controlled System – “mpSmart-Lowdosing” Rev. 1.1 (01.2021)
- Page 2 Content ............................................1 Flow Controlled System – “mpSmart-Lowdosing”..........................1 General ............................Fehler! Textmarke nicht definiert. Declaration of conformity..................... Fehler! Textmarke nicht definiert. Description of functions......................Fehler! Textmarke nicht definiert. Proper use ............................Fehler! Textmarke nicht definiert. Intended purpose........................Fehler! Textmarke nicht definiert.
- Page 3 EU Low Voltage Directive 2014/35/EU. Description of function. The mpSmart-Lowdosing have been developed for the transport of liquids. The controller has been developed for operating the micropump. Bartels Mikrotechnik can assume no liability for damages resulting from the pump media.
-
Page 4: Proper Use
Do not make any modifications or extensions to the pump or controller without the prior written consent of the manufacturer. Such modifications may impair the safety of the unit and are prohibited! Bartels Mikrotechnik GmbH rejects any responsibility for damage to the unit caused by unauthorized modifications to the pump and risk and liability are automatically transferred to the operator. - Page 5 The flow-controlled system: mpSmart-Lowdosing Flow Controlled System – „mpSmart-Lowdosing“ This Flow Control System is a smart module for precise and regulated dosing of liquids. An onboard Arduino reads out a flowmeter made by Sensirion, comparing it to a target value and operates the mp6 micropump corresponding to a PID-regulator.
- Page 6 Arduino nano microcontroller manually. To start your mpSmart-Lowdosing kit all you need to do is to choose one of the four flowrate ranges, which sets the pump frequency, e.g. 150 – 500 µl/min, and the exact flowrate with the regulator underneath (or the text field next to it).
- Page 7 To log your measurements, you can simply click on “Save chart data” to save your measurements. The Data will be stored in a .csv file. Since the Sensor used is calibrated for water and you plan on using a different fluid, we added an option to calibrate your system for other fluids (ideally water-like fluids).
- Page 8 All values are approximate and no guarantee of specific technical properties. Changes in the course of technical progress are possible without notice. Visit our Website Contact Data: www.bartels-mikrotechnik.de/produkte/downloads Bartels Mikrotechnik GmbH Konrad-Adenauer-Allee 11 for further information on applications. 44263 Dortmund Germany Tutorials and helpful answers to frequently asked www.bartels-mikrotechnik.de...