Setting Up The Remote Control - Sony VAIO VGC-RA820G Series Quick Start Manual

VAIO Digital Studio Computer Quick Start

Setting up the remote control

1 Turn the remote control over.
2 Press in the tab and lift the battery cover up.
3 Insert two AA batteries (supplied) into the remote control as shown.
4 Align the battery cover to the remote control.
5 Press down until the cover clicks into place.
Inserting batteries into the remote control
✍
If your remote control does not operate properly, you may need to replace the
batteries. When your remote control is not being used for extended periods of time,
remove the batteries to avoid possible damage from battery leakage.
32
Tab