Table of Contents
Advertisement
2. Setting up the monitor
Connect to PC
1. Connect the power cord to the back
of the monitor firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
2.2 Operating the monitor
Description of the control buttons
2X1B7QPJEB:
7 6
5
Switch monitor's power
ON and
Access the OSD menu.
Confirm the OSD
adjustment.
Adjust the OSD menu.
PowerSensor
Change the signal input
source.
Return to previous OSD
level.
SmartImage hot key. There
are 7 modes to select:
Office, Photo,
Game, Economy, LowBlue
Mode,Off.
7
3
4
2
1
OFF.
Movie,
Advertisement
Table of Contents
