Sony BRAVIA KLV-46W550A Operating Instructions Manual page 39

Condition
No picture from the connected
equipment appears on the
screen.
You cannot select the
connected equipment on the
Home Menu or you cannot
switch the input.
Sound
The picture is good, but there
is no sound.
No sound or noisy sound.
Channels
Some channels are blank.
General
The TV power cannot be
turned on.
The TV turns off
automatically (the TV enters
standby mode).
The TV turns on
automatically.
Some input sources cannot be
selected.
The remote does not function. • Replace the batteries.
HDMI equipment does not
appear on "HDMI Device
List."
You cannot select "Off" in
"Control for HDMI".
Explanation/Solution
• Turn the connected equipment on.
• Check the cable connection.
• Press to display the list of inputs, then select the desired input.
• Correctly insert the memory card or other storage device in the digital
still camera.
• Use a digital still camera memory card or other storage device that has
been formatted according to the instruction manual supplied with the
digital still camera.
• Operations are not guaranteed for all USB devices. Also, operations
differ depending on the features of the USB device and the video being
played.
• Check the cable connection.
• Press 2 +/– or % (Mute).
• Check if the "Speaker" is set to "TV Speaker" (page 29).
• Check if the TV system setting is appropriate (page 32).
• The channel is for scrambled/subscription service only. Subscribe to a
pay TV service.
• The channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
• Check if ENERGY SAVING SWITCH is on (page 10).
• Check if the "Sleep Timer" is activated, or confirm the "Duration"
setting of "On Timer" (page 24).
• Check if the "Idle TV Standby" is activated (page 24).
• Check if the "Presence Sensor" is activated (page 24).
• Check if the "On Timer" is activated (page 24).
• Select "Video Labels" and cancel the "Skip" setting for the input source
(page 30).
• Check that your equipment is compatible with control for HDMI.
• If you have connected any audio system that is compatible with control
for HDMI, you cannot select "Off" in this menu. If you want to change
the audio output to the TV speaker, select "TV Speaker" in the
"Speaker" menu (page 29).
39
GB